Tedea Huntleigh Model 1042 Loadcell

• TEDEA-HUNTLEIGH SINGLE POINT ALUMINUM LOAD CELL 1042

  The Model 1042 is a low profile single-point load cell designed for direct mounting in weighing platforms. Its small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for retail, bench and counting scales.

  Capacities of 5kg and above are supplied as standard in anodized aluminum. This high accuracy load cell is approved to NTEP and other stringent approval standards, including OIML R60. A humidity resistant protective coating assures long term stability over the entire compensated temperature range. 

  The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extenstion, is achieved by feeding this voltage into the appropriate electronics.

   

  Load Cell 1042 OPTIONAL

  • EEx ia IIC T4 hazardous area approval
  • FM approval available
  • High stiffness version available for dynamic weighing applications

  Load Cell 1042 APPLICATIONS

  • Bench scales
  • Counting scales
  • Grocery scales

APPROVAL	ATEX, FM, NTEP, OIML
SIGNAL	Analog
PROTECTION CLASS	IP66
MATERIAL	Aluminum
MAXIMUM EXCITATION	15 VDC or VAC RMS
MAXIMUM SAFE OVERLOAD	150 % of R.C.
MAX PLATFORM SIZE	-
OPERATING TEMP RANGE	-20 to -70 C
RECOMMENDED EXCITATION	10 VDC or VAC RMS
RECOMMENDED TORQUE	Up to 30 kg; 7.0, 35 kg and above: 10.0
SENSITIVITY	2.0 mV/V
STORAGE TEMP RANGE	-
MANUFACTURER	Vishay-Tedea
CABLE TYPE	6 wire, PVC, single floating screen
CABLE LENGTH	1 m
INTERCHANGEABLE	Artech 879, Cardinal TSP, CAS BCA, Flintec PC 42, Revere 642, Rice Lake RL1042, Rice Lake RLSP4, Scaime AG, Coti CG-42, HBM SP4